BCDXQ - EA 911F PART B(PART A EA 911)
- MSDS: BCDXQ
- Manufacturer: DEXTER CORP HYSOL DIV
- Product Name: EA 911F PART B(PART A EA 911)
- National Stock Number: 8040-00N000207
Product Identification
Product ID:EA 911F PART B(PART A EA 911)
MSDS Date:01/01/1985
FSC:8040
NIIN:00N000207
MSDS Number: BCDXQ
Responsible Party
Emergency Phone: 415-687-4201
Cage: 1JB33
Contractor
Telephone: 202-483-7616
Cage: 33564
Ingredients
MERCAPTAN
Fraction By Weight: 88.0%
ALIPHATICAMINE
Fraction By Weight: 2.0%
ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE
CAS: 1332-21-4
RTECS: CI6475000
Fraction By Weight: 10.0%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 0.5 FIBERS/CC; A1;89
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:CAUTION! MAY CAUSE SKIN & IRRITATION
First Aid
First Aid:WASH SKIN W/SOAP & WATER. FLUSH EYES IMMEDIATELY W/PLENTY OF
WATER.
Fire Fighting
Flash Point:>200F TCC
Extinguishing Media:CHEM.FOAM,CO*2,DRY CHEM.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:REMOVE EXCESS. CLEAN RESIDUE W/SOLVENT.
Handling
Handling and Storage Precautions:STORE AT 75 F
Other Precautions:READ CONTAINER LABEL
Exposure Controls
Respiratory Protection:APPROVED NIOSH RESPIRATOR & MASK FOR ASBESTOS
Ventilation:LOCAL: HIGHLY RECOMMENDED. MECH: HIGHLY RECOMMENDED.
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NOT NECESSARY UNLESS THE CURED ADHESIVE IS
DRY SANDED, ETC
Supplemental Safety and Health
BOILING PT:DECOMPOSES. IF NECESSARY TO SAND THE CURED ADHESIVE "WET
SANDING"IS RECOMMENDED TO ELEMINATE AIRBORNE ASVESTOS.PART B OF A 2
PART KIT.SEE PART A,EA911 UNDER SAME NSN.
Chemical Properties
Spec Gravity:1.2500
Appearance and Odor:VISCOUS GRAY PASTE W/SULPHUR-LIKE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:LANDFILL OR CONTROLLED BURNING IF IN ACCORDANCE
W/FED, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.